If you’ve got plasterboard walls then you’ll need the best plasterboard fixings to hang or secure your wall or ceiling fittings in place. Plasterboard by the very nature of its construction isn’t as strong or secure as fixing into masonry. Plasterboard doesn’t boast the depth of standard brick work, which means there is typically less to work with.
You can stick with standard wall plugs and drill into battens on a stud wall, but it's not always that simple. Your measurements might not match up so you need to call upon specialist plasterboard fixings. Load is the critical criteria, especially if you're dealing with heavy expensive objects like a large screen TV or a filled radiator. These can easily top 30-40 kg and no one wants to see them falling off the wall.
Here we look at the popular everyday options, heavy duty solutions and cost effective fixings to help you make the right choice whenplasterboarding.
The best plasterboard fixings for your everyday DIY projects
You can trust Homebuilding & Renovating.Our expert reviewers spend hours testing and comparing products and materials in order to help you choose the best for your home and garden.Find out more about how we test.
Toggle bolts– also known as spring toggle fixings amongst other names – are a popular and easy to install plasterboard fixing. They consist of a screw and a set of wings which are spring loaded. They open up after being pushed through a drilled hole then you simply need to tighten.
This set from Glarks is reasonably priced, well built and contains a selection of popular and commonly used sizes allowing you to choose the right one for the job at hand. Depending on what size you choose a toggle bolt can happily hold around 30Kg, more if you choose a larger size. But you need to take note of the screw length. These come in various sizes and you'll need one that fits a cavity to get a tight fit.
If you’vegot something really heavy to hang on plasterboard – or hardboard, plywood, MDF – thenthis extra large hollow anchor fixing is a great choice. The manufacturer claims loads of up to 270 kg, but we don’t have anything that heavy to test it. But it can easily take on any heavy items such as a radiator or large TV.
However, these are the most expensive plasterboard fixings in this guide and while not difficult to install they do take a little longer to get to grips with. It takes a bit of wiggling to get into place on small cavities and in some cases its far more than you'll need.
安装您需要圣钻25毫米的洞arted before threading a cord through two small holes in the fixing. This helps keep the fixing from disappearing down a cavity and two small teeth embed themselves into the back of the board to stop it moving. Then a large screw and 25mm plug bring everything together before adding two more small screws to hold the plug in place. Now you’re ready to go.
If youare looking for a cost effective solution that can tackle most everyday hanging jobs thenthese hollow wall anchors are the answer. They are produced by a myriad of manufacturers with slightly different designs and come in a range of sizes. This makes them very common, versatile and cheap.
他们很容易安装——钻一个洞,把anchor into the hole (though you might need a setting tool to make it easier), tighten and then remove the screw ready to put up the fixing.
One thing you will need to make sure that you are getting the right size. If you are drilling into 12.5mm plasterboard you need a hollow wall anchor with a collar that matches that size. Get one too big and it won’t hold. Loads are dependent on size, but you can expect a fixing for a 12.5mm plasterboard to hold at least 30kg.
Here we have chosen standard hollow wall anchors that fit the bill and should fit your plasterboard. But check the thickness of your board as you might need something larger if you have thicker plasterboard.
If you’vegot a heavy load that needs fixing but you only have a narrow cavity to work with thenthese Gripit fixings are a quick to install optionthat can be reused if needed. Available in a variety of sizes and colours the Gripit range claims that it can deal with loads from 20 kg up to 113 kg.
To make selection easier each colour gives recommendation on what it is good for. But note, as a general rule the upper loads are generally tested on thicker plasterboards and use more than one fixing to spread the load.
You will need to drill a 18-25mm hole to insert the fixing, but this is nice and simple. Push the fixing into the hole and use a screwdriver to open the wings. These are flat which makes them good for narrow cavities. Don’t panic if you drill and fix in the wrong place you can simply close the wings and pull out the fixing ready to use again. But they are not always the easiest to hide on small fittings.
Need aquick fix for hanging a picture, introducing a light switch or a plug socket into plasterboard without the need for any drilling? Then you need a self drill plasterboard fixing.These are the perfect solution for quick installation of a fitting.
You simply mark where you want the screw to go, get a screwdriver and screw in the fixing. Just make sure you don’t over tighten as you can compromise the integrity of the plasterboard. As soon as that happens the fixing will need to be removed and placed elsewhere.
But these fixings are not a good choice for heavy loads, they are very much for light loads, in reality less than 10 kg. If you’ve got a nice new big screen TV, try a different plasterboard fixing.
Heavy loadsand small cavities? The Bullfix starter pack is what you need. Not only does it contain ten fixings, it includes a 20mm drill bit and ten 5mm x 20mm screws, so you can get started straight away. This makes it especially ideal fordot and dab plasterboardwhich typically has a small cavity and when you can’t drill into masonry.
Installation is quick and easy and doesn’t need much help from any tools, apart from a drill and hammer. You tap the collar into the hole with a hammer, insert the fixing tap it flat and it's ready to go. Its design means you can’t screw into the fixing until its wings are fully extended.
It can cope with loads up to 116 kg on 12.5mm – 15mm plasterboard, less on 9.5mm board. So it can take on radiators, kitchen cupboards and flat TV mounts, but be warned Bullfix doesn’t recommend it for cantilever or extendable arms.
