Tiling a Roof: How Much Does it Cost?

Handmade clay tiles from Heritage Clay Tiles
(Image credit: Heritage Clay Tiles)

屋面覆盖层可以有一个重要的选择impact on the eventual look of the home. And yet, in the initial stages, much more attention is lavished on the layout and the external cladding of the walls. However, it is the roof that makes an enclosure into a home and the choices tend to reflect the region in which the home is built.

Of course, there are many forms of roof covering, from the traditional thatch to the more contemporary sheet roofing; not to mention green roofing, which is taking up an increasing chunk of the market. Nevertheless, for most self builders the choices revolve around plain tiles, interlocking tiles and slates.

Visit the Homebuilding & Renovating Show

Need expert advice or design inspiration for your project? Get two free tickets to theHomebuilding & Renovating Show

The costs set out below relate to a modest L-shapedbungalowwith a roof area of around 180m2 and with one valley, hip and ridge tiles, and a universal dry hip and ridge system. To simplify the comparison, the same clay ridge and hip tiles are specified.

The valleys for the plain tile and slate options are assumed to be lead, while the valley for the interlocking tile option is GRP. (If valley tiles were required for the plain tile option the price would subsequently increase, as each valley tile would cost around £5).

In Scotland, a layer of sarking decking is required over the trusses and beneath the underfelt, necessitating counter battening down the roof.

(MORE:Ultimate Guide to Roofs)

Plain Tiles

These are the small – usually 267x165mm – rectangular tiles that give so many country properties that distinct feeling of mellowness. Traditionally they were made ofclayand they often had acambernaturally built into them in one or both directions, causing them to lie slightly unevenly. Modern versions in either clay or concrete can mimic this, but the older and more traditional tiles are still available — albeit often handmade and, therefore, much more expensive.

  • Of the three mainstream roof covering choices, plain tiles, whether clay or concrete, tend to be themost expensive, and that’s mainly down to the increased labour costs of having to lay and fix around 60 tiles per square metre.
  • The overlap on the tiles means that there is practically three times the amount ofbatteningrequired and, while the batten itself is cheap, the labour to fix it is much more intensive.
Swipe to scroll horizontally
Rosemary machine-made clay roof tiles
Tiles (10,716 tiles @ £450/1,000 £4,822.20
– Labour (14 days) £3,528.00
Breathable membrane (5 rolls) £324.60
板条(@ 31便士metre) £527.85
– Labour to underfelt and batten £2,666.52
Eaves support tray labour and material £239.81
Universal dry hip and ridge system and ridge and hip tiles £3,989.00
– Labour (5 days) £1,260.00
Valley lead £92.42
– Labour £36.12
Nails and fixings £81.18
垃圾清理 £295.00
Total £17,862.70

Interlocking Tiles

This is the cheapest roof covering option and it is the one that many volume housebuilders default to for that very reason.

Once again, there are many versions both in clay and concrete with some that mimic traditional single roll pantiles, some that emulate (without close inspection) the flat planes of slate roofs and then there are others which unashamedly present a profile in their own right.

Just because they are the cheapest option, doesn’t mean that they don’t have a place in self-build, particularly where many infill plots have to fit in with existing styles and choices of materials.

Wienerberger’s Rivius clay roof tile

Wienerberger’s Rivius clay roof tile (coloured to look like slate) reduces labour costs as they are 10 per cent larger than plain tiles and interlocking. Coverage is 9.5 tiles per m² and the cost is approximately £1.40/tile, totalling £13.30/m² (Image credit: Wienerberger)
  • Each interlocking tile costs over平瓦的成本的两倍。But, at an average of 11 to the square metre,far fewer tiles are neededand the labour costs for fixing them are significantly reduced.
  • The cost of battening the roof is alsomuch lessas the gauge or distance between the battens is 300mm or more.
Swipe to scroll horizontally
Marley Modern interlocking roof tiles
Tiles (1,980 tiles @ £1,100/1,000) £2,153.80
– Labour (7 days) £1,764.00
Breathable membrane (5 rolls) £324.60
板条(@ 31便士metre) £139.50
– Labour to underfelt and batten £756.00
Eaves support tray labour and material £239.81
Universal dry hip and ridge system and ridge and hip tiles £3,989.00
– Labour (5 days) £1,260.00
GRP valley labour and materials £61.00
Nails and fixings £81.18
垃圾清理 £295.00
Total £11,063.89

Slates

The waterways and canals of the Victorian era made the transportation of slates from the Welsh hills much easier and their use and popularity grew. Today, they are still one of the most popular forms of roof covering, despite the fact that only a tiny minority come from Wales and the rest of the UK.

Natural slates are now imported from China, Brazil and Spain in colours that can closely follow the traditional, and much more expensive, Welsh equivalents.

Natural slates, like plain tiles, do not have any drips or contours and therefore have to be laid in such a way that every part of the roof is covered. This means that at some points they may betreble lapped.

Manmadeslates are also available — those that directly mimic natural slates are no cheaper but are perhaps slightly more durable. Others conspire to look like natural slates, while actually being interlocking; whether they ever achieve their goal of looking like the real thing is debatable.

Swipe to scroll horizontally
Natural Spanish slates
Slates (3,547 slates @ £1.27 each) £4,504.69
-劳工(12天) £3,024.00
Breathable membrane (5 rolls) £324.60
板条(@ 31便士metre) £263.93
– Labour to underfelt and batten £1,389.60
Eaves support tray labour and material £239.81
Universal dry hip and ridge system and ridge and hip tiles £3,989.00
– Labour (5 days) £1,260.00
Valley lead £92.42
– Labour £36.12
Nails and fixings £81.18
垃圾清理 £295.00
Total £15,500.35

(MORE: What are the options when it comes toroof coverings)

Flat Roof Costs

Flat roofstend to be priced on a supply and fit basis with some packages (e.g. single ply) including build-up, insulation, etc. as well. This all means comparing like for like is tricky. However, here are the headline prices for those wishing to put something in their budget at an initial stage:

Swipe to scroll horizontally
Flat Roof Cost Guide
Felt (torch-on method): Approximately £40-£50/m² fitted
EDPM Single Ply: Around £80/m² fitted
Fibreglass GRP: Approximately £90/m² (including lead flashing, trim and installation)
Green Roof: From £50/m² for a sedum roof to £200/m² for a fully planted intensive roof (bear in mind that any reinforcements that may be needed for the roof will cost extra)
Metal: Lead costs anything from around £50/m² not including installation. Zinc and copper are more at around £100/m² — again, this does not include installation

How to Build a Roof

(MORE:Great Roof Design Ideas)

David Snell

David is one of the UK's leading self build and plotfinding experts, and a serial self builder who has been building homes for 50 years. The author ofBuilding Your Own Home, David spent decades as a speaker and expert at self build exhibitions such as the Homebuilding & Renovating Show. He has recently finished his fourteenth self build project.