太阳向地球提供更多的能量在一个ur than the world uses in a year, according to the US Government’s Department of Energy. An extraordinary statistic, but perhaps misleading in that the amount of energy actually available will vary with where you are in the world, the season, the time of day and the technology available to harvest it. Nonetheless, surely it should be possible to run a new home entirely on power fromsolar panels?
Solar energy arrives here in the form of light and heat. We use technology to capture, magnify and convert it into useful purposes. As far as a house is concerned, there are three ways to do that:
- Photovoltaic (PV) uses silicon to convert light to electricity.
- Solar thermal uses the greenhouse principle to produce useful amounts of hot water.
- Passive solar energy is light energy gathered by the house without the use of technology. That is, sunlight passing through a window and warming the air within.
There is a fourth to consider too — PVT. In basic terms, PVT is a hybrid solar panel consisting of PV and thermal functionalities. PVT panels can contribute electricity while heating hot water.
It used to be considered by many that the UK did not receive enough sunshine to justify investing in solar power. The recent proliferation of PV arrays on roofs and in solar farms has dispelled that myth and it is the efficient use of all forms of solar energy that makes the idea of the solar-powered house a viable possibility.
The one issue that could put the breaks on this notion – storing this power (solar power is generated in the day, which is not always when we need it) – is beginning to be resolved, too.
How Much Energy is Enough to Power a Home?
This is a very good question, and an essential piece of information to feed in to the design process. We need to know how much energy the house requires before deciding how much we can or want to generate.
There are plenty of ‘UK average’ figures:
- the average three bedroom house uses 4,800kWh of electricity per year;
- a four-person household uses 3,000kWh on hot water each year;
- a flat screen TV uses 0.1kWh/hr (hour);
- a fridge uses 1.6kWh/day
However, at best these are only a starting point. What is wanted is a detailed and accurate calculation of the energy demand based on the building and the people in it. This ideally needs to be completed by a specialist, as working out how much electricity is needed for lighting, appliances, etc, and so on is a tricky process.
These will be largely fixed amounts: we can choose to have LED lighting rather than tungsten filament and A+, A++ and A+++ rated appliances, but that is about as far as we can go.
It is the fabric of the building where we can have the greatest influence. The insulation and airtightness are important, but glazing, shading and orientation are also key issues that need to be looked at.
And then there is the question of balance: how much of the budget can be spent on renewable energy technology, how much on extra insulation and airtightness, and what are the rewards?
There are a number of ways of solving this problem and the three examples on the following pages give some idea of what is possible. Regardless of the route taken, the following projects all demonstrate that the solar-powered home is a practical option for self builders, regardless of budget or project size.
Storing Solar Energy
太阳能的问题是我们的访问ss to most of it when we want it least — in the daytime and in summer.
- Caplin Home’s Earth Energy Bank is the only practical option currently available for storing heat for weeks or months, but there are more options available for storing electricity.
- TheTesla Powerwallhas a 7kWh capacity, which is sufficient to power most homes through the evening, given that the PV panels fully charge it during the day. Multiple batteries can be installed together for homes with greater energy needs.
- TheSonnenbatterietakes a slightly different route with a modular design that can be customised to store up to 16kWh. This is already seeing some success in Germany, which is some way ahead of us in terms of solar technology. This product is now available in the UK.
- Maslowis a 3kWh unit that looks like a small gas boiler and is aimed at the urban three bedroom home. It can be connected directly to PV panels and to electronic devices via smart USB sockets and is intended to run a home office.
What is PVT?
While PV and solar thermal panels produce either electricity or heat,365必威(photovoltaic thermal) panels generate both. They look like PV panels but have a heat exchanger on the back.
We assume the bright sun of summer will be best but PV panels are actually more efficient in cold sunny weather; as they get warmer they become less efficient. The panel loses around 0.5% efficiency for each 1°C over 25°C. PV panels can hit 70-80°C in bright sunlight, meaning a 25% loss in efficiency at those peak times when they should be generating most.
A good PVT panel, like those supplied by Solar Angel, will maintain the panel at its optimum temperature, not only increasing electricity production but also generating significant amounts of heat. The Solar Angel panel is rated at 250W peak electricity production and also produces 648W of heat energy.
Cheap Daytime Electricity
最近越来越多的太阳能farms has put pressure on the national electricity grid with a surge in electricity generation in the daytime. An innovative solution to be trialled in Wadebridge, Cornwall, is to encourage householders to change their habits by offering low-cost electricity in the daytime.
The Sunshine Tariff, provided by Wadebridge Renewable Energy Network, will be offered to residents with a rate of 5p/kWh between 10am and 4pm from April to September and a higher rate of 18p at all other times. The trial will use smart metering technology to see how much customers could save by changing their electricity usage patterns to take advantage of the low daytime rate.
